Korg R3 User Manual
75
SHIFT functions
1-1. NAME PROGRAM
Renaming a program
The R3 lets you assign a name of up to eight
characters to each program. In Play mode,
the main display will show the program
number and the program name.
The R3 lets you assign a name of up to eight
characters to each program. In Play mode,
the main display will show the program
number and the program name.
Procedure
1
Hold down the [SHIFT] button and press
the PROGRAM SELECT [1] button.
The [1] button will blink. The main dis-
play will show the current program
name.
the PROGRAM SELECT [1] button.
The [1] button will blink. The main dis-
play will show the current program
name.
2
Use the OCTAVE [UP][DOWN] but-
tons
tons
to select a character, and use the
[PAGE] dial
to change the character.
You can also use the [1] knob to enter
uppercase characters, the [2] knob to
enter lowercase characters, the [3] knob
to enter numerals, and the [4] knob
to enter symbols.
uppercase characters, the [2] knob to
enter lowercase characters, the [3] knob
to enter numerals, and the [4] knob
to enter symbols.
3
When you’ve finished editing the pro-
gram name, press the [1] button.
The program name will be changed and
you’ll return to Play mode.
If you decide to discard your changes,
press the [EXIT] button.
gram name, press the [1] button.
The program name will be changed and
you’ll return to Play mode.
If you decide to discard your changes,
press the [EXIT] button.
If you’ve edited the program name,
your changes will be lost if you turn
off the power or switch to a different
program without writing the program.
Be sure to write the program if you
want to keep the edited program name.
your changes will be lost if you turn
off the power or switch to a different
program without writing the program.
Be sure to write the program if you
want to keep the edited program name.
2-1. INIT PROGRAM
Initializing a program
Here’s how to initialize the settings of the
currently selected program.
Here’s how to initialize the settings of the
currently selected program.
Procedure
1
Hold down the [SHIFT] button and press
the PROGRAM SELECT [2] button.
The [2] button will blink. The main dis-
play will show the name of the currently
selected program.
the PROGRAM SELECT [2] button.
The [2] button will blink. The main dis-
play will show the name of the currently
selected program.
2
To initialize the program, press the [2]
button.
The program will be initialized, and
you’ll return to Play mode.
If you decide not to initialize the pro-
gram, press the [EXIT] button.
button.
The program will be initialized, and
you’ll return to Play mode.
If you decide not to initialize the pro-
gram, press the [EXIT] button.
show the copy-source program number
and timbre, and the copy-destination
timbre.
and timbre, and the copy-destination
timbre.
6
To execute the copy, press the [3] but-
ton
ton
.
The settings will be copied, and you'll
return to Play mode.
If you decide to cancel the copy opera-
tion, press the [EXIT] button.
return to Play mode.
If you decide to cancel the copy opera-
tion, press the [EXIT] button.
Copying and exchanging timbres/ Initializing a program
3-1. COPY TIMBRE
Copying a timbre
Here’s how to copy the timbre settings
from another program into a timbre of the
currently selected program.
This operation is available if TIMBRE SE-
LECT [TIMBRE 1] or [TIMBRE 2] is se-
lected.
Here’s how to copy the timbre settings
from another program into a timbre of the
currently selected program.
This operation is available if TIMBRE SE-
LECT [TIMBRE 1] or [TIMBRE 2] is se-
lected.
Procedure
1
Hold down the [SHIFT] button and
press the PROGRAM SELECT [3] but-
ton
press the PROGRAM SELECT [3] but-
ton
.
The [3] button will blink. The main dis-
play will show the copy-source program
number and program name.
play will show the copy-source program
number and program name.
2
Use the [PAGE] dial to select the copy-
source program.
source program.
3
Press the [3] button.
The upper line of the main display
will show the copy-source timbre
(SrcTmb>#), and the lower line will
show the copy-destination timbre
selected by TIMBRE SELECT.
The upper line of the main display
will show the copy-source timbre
(SrcTmb>#), and the lower line will
show the copy-destination timbre
selected by TIMBRE SELECT.
4
Use the [PAGE] dial to select the copy-
source timbre, and use the TIMBRE SE-
LECT [TIMBRE1] [ TIMBRE2] buttons
to select the copy-destination timbre.
source timbre, and use the TIMBRE SE-
LECT [TIMBRE1] [ TIMBRE2] buttons
to select the copy-destination timbre.
5
Press the [3] button.
The main display will ask you to con-
firm the operation. The upper line will
ask “Copy OK?” and the lower line will
The main display will ask you to con-
firm the operation. The upper line will
ask “Copy OK?” and the lower line will