Panasonic AV-HS410N User Manual
21
1. Parts and their functions
1-1-3. User button area
User buttons (USER BUTTON) [U1 to U8]
These are used to assign some functions of the menu
settings to the [U1] to [U8] buttons on the Config menu.
Refer to “3‑3‑1. Setting the user buttons” (<Operations
settings to the [U1] to [U8] buttons on the Config menu.
Refer to “3‑3‑1. Setting the user buttons” (<Operations
and Settings> Operating Instructions).
U1
U2
U3
U4
U5
U6
U7
U8
USER BUTTON
1-1-4. Transition area
CUT
AUTO
MIX
MIX
WIPE
N/R
R
BKGD
KEY
KEY
ON
FTB
ON
PinP1
ON
PinP2
ON
DSK
ON
WIPE DIRECTION
WIPE
MIX
WIPE
[BKGD] button
This executes the background transition when the [AUTO]
button () or fader lever () has been operated.
When the [BKGD] button is pressed and it is selected, its
indicator lights in amber.
If the [KEY] button () is now pressed, the indicator goes
off, and the de‑selected status is established.
When the [BKGD] button and [KEY] button () are
pressed at the same time, both buttons are set to the
selected status.
button () or fader lever () has been operated.
When the [BKGD] button is pressed and it is selected, its
indicator lights in amber.
If the [KEY] button () is now pressed, the indicator goes
off, and the de‑selected status is established.
When the [BKGD] button and [KEY] button () are
pressed at the same time, both buttons are set to the
selected status.
[KEY] button
This executes the key transition when the [AUTO] button
() or fader lever () has been operated.
When the [KEY] button is pressed and it is selected, its
indicator lights in amber.
If the [BKGD] button () is now pressed, the indicator
goes off, and the de‑selected status is established.
When the [BKGD] button () and [KEY] button are
pressed at the same time, both buttons are set to the
selected status.
() or fader lever () has been operated.
When the [KEY] button is pressed and it is selected, its
indicator lights in amber.
If the [BKGD] button () is now pressed, the indicator
goes off, and the de‑selected status is established.
When the [BKGD] button () and [KEY] button are
pressed at the same time, both buttons are set to the
selected status.
MIX, WIPE selection status LEDs
These light up to indicate whether MIX or WIPE has been
selected when background transitions or key transitions
are executed.
selected when background transitions or key transitions
are executed.
[MIX] button
This is used to switch the A and B bus images while
making them overlap.
During the transition, the A and B bus output total is kept
at 100 %.
When the [MIX] button is pressed and it is selected, its
indicator lights in amber.
If the [WIPE] button () is now pressed, it goes off, and
the de‑selected status is established.
making them overlap.
During the transition, the A and B bus output total is kept
at 100 %.
When the [MIX] button is pressed and it is selected, its
indicator lights in amber.
If the [WIPE] button () is now pressed, it goes off, and
the de‑selected status is established.
[WIPE] button
This is used to execute the transition using the pattern
selected by the number key (9).
When the [WIPE] button is pressed and it is selected, its
indicator lights in amber.
If the [MIX] button () is now pressed, it goes off, and the
de‑selected status is established.
selected by the number key (9).
When the [WIPE] button is pressed and it is selected, its
indicator lights in amber.
If the [MIX] button () is now pressed, it goes off, and the
de‑selected status is established.