Roland 5100012850-01 User Manual
30
Reset to Default Factory Setting (Factory Reset)
The “factory reset” operation will return all settings stored in the VP-7 to their factory-set state.
The factory reset operation will initialize the following items.
The factory reset operation will initialize the following items.
Item
Default value
The last-selected sound
Human Voice - Female Choir
MIDI receive mode (p . 11)
Ch1
2
Pitch bend range (p . 29)
2
1. Turn off the VP-7’s power .
2. While holding down the [Bypass] button and the [Female Choir] button, turn on the power .
2. While holding down the [Bypass] button and the [Female Choir] button, turn on the power .
All indicators will light.
When the factory reset is completed, all indicators will go out, and the VP-7 will return to its normal state.
When the factory reset is completed, all indicators will go out, and the VP-7 will return to its normal state.
Sound List
The VP-7 allows you to switch its sounds from an external MIDI device, using program change messages.
The program numbers are determined according to the sound and the Bypass on/off state, as shown in the table below.
The program numbers are determined according to the sound and the Bypass on/off state, as shown in the table below.
Bank Select: MSB=80, LSB=0
Program Number
Sound name
Bypass
OFF
Bypass
ON
Human
Voice
1
18
Female Choir
2
19
Kids Choir
3
20
Gregorian Choir
4
21
Jazz Scat
Vocal
Designer
5
22
Duet
6
23
Trio 1
7
24
Trio 2
Vocoder
8
25
Vocoder 1
9
26
Vocoder 2
10
27
Vocoder 3
Variation
11
28
Male & Female
12
29
Kids Choir 2
13
30
Classic
14
31
Jazz Scat 2
15
32
Background
16
33
Pop
17
34
Gospel
If a program number from 1 through 17
is received, Bypass will turn off, and the
Human Voice/Vocal Designer/Vocoder
sound will be heard.
If a program number from 18 through 34
If a program number from 18 through 34
is received, Bypass will turn on, and only
the direct sound from the microphone
will be heard.
If you want to turn bypass on/off via
If you want to turn bypass on/off via
MIDI, use CC #66 to control it.
If you’ve connected a digital piano
If you’ve connected a digital piano
(e.g., Roland HP series), you can use the
sostenuto pedal to control this.
You can also transmit program change
You can also transmit program change
messages to turn bypass on/off.