Peavey DJS 1800 User Manual

Page of 4
 
Portable
DJ System
SPECIFICATIONS
Enclosure:
 1800 System
Frequency Response:
Low Frequency Limit (-3 
 point):
40 Hz
 Low Frequency Limit
 
 point):
35 Hz
Power Handling:
350 watts continuous (37.4 volts RMS)
600 watts program
Sound Pressure Level 1 Watt at 1
Meter Swept Sine Input in 
Environment:
98 
Maximum Sound Pressure Level:
121 
Radiation Angle Measured at -6 
Point of Polar Response:
   
Horizontal:
96”   
Vertical:
92” 
 k-5 
Horizontal:
73”   
Vertical:
74” 
5 k-16 
Horizontal:
97” 
Vertical:
46” 
Directivity Factor, (Mean):
6.87; 
 -4.6
Directivity Index Di (Mean):
8.37 
 
 
 -3 
Transducer Complement:
DJS 1800 Sub:
 4 ohm 
 Black 
woofer with 
 impregnated cone.
DJS 1800:
Peavey 22XT  titanium compression
driver loaded onto a CH-3 
 H x
 V horn and a 
 4 ohm 15435
Sheffield@ midwoofer.
Box Tuning Frequency (Fbox):
DJS 1800 Sub: 55 Hz
DJS 1800 Closed Box (fc): 80 Hz
Crossover Frequency:
Enclosure Materials and Finish:
DJS 1800 Sub: 200 Hz
 MDF cabinet, braced internally,
DJS 1800: 1200 Hz
covered with durable black carpet, and
Crossover Type:
Internal Passive
reinforced with high impact polymer
corners
Electrical Crossover Slope:
Subwoofer: 12 
 low pass (6 
octave high output)
Satellite: 12 
 for satellite internal
 and low pass
Mounting:
DJS 1800 Sub: Internal mounting block,
guide pole, and stand adaptor plate
DJS 1800: Bottom-mounted 
 stand
adaptor, DJS 1800 pole stand
Impedance (Nominal):
4 ohms
Dimensions:
DJS 1800 Sub:
22.5” W x 30.5” H x 25.75” D
Impedance (Minimum):
Input Connections:
DJS 1800 Sub: One 
 female full range
input and one 
 female high pass
output
DJS 1800: Two 
 female full range
inputs in parallel, one 
 female biamp
low input and one 
 female biamp high
input
(57.2 cm W x 77.5 cm H x 65.4 cm D)