Vocopro PA-MAN User Manual

About the Remote Control

• The area between the remote control

and the main unit must be clear of large

obstacles.

• Do not expose the remote control sensor to

strong lighting, especially an inverter type

fluorescent lamp as this may cause the

remote control to not function properly.

Installing Batteries in the Remote Control

1. Turn the remote control over and slide the battery

compartment cover off.

2. Insert the AAA batteries, positioning them according to

the polarity (+, --) markings on the inside of the battery

compartment.

3. Close the battery compartment cover.

Battery Replacement

If you ﬁnd that the distance between the remote control and

the main unit must be shorter in order to use the remote

control, this means that the batteries are low and must be

changed. Replace both batteries with new ones.

Battery Notes:

• Use AAA batteries.

• Be sure the polarities (+, --) are correct.

(See the illustration inside the battery

compartment).

• Remove the batteries when not using the

remote control for an extended period of

time.

• If batteries leak, dispose of them

immediately. Avoid skin, clothing and any

other contact with the leaked material.

Clean the battery compartment thoroughly

before installing new batteries.

• Do not mix old and new batteries.

• Do not mix alkaline, standard (carbon-

zinc) with rechargeable (nickel-cadmium)

batteries.

Connecting the Antennas

Connect each of the two included antennas to the

connections labeled ANT A and ANT B on the front panel of

the PA-MAN and turn each clockwise to lock.

Connecting the Power Cable

Plug the supplied AC power cable into the AC inlet after all

other connections are complete and then plug the AC power

cable to an AC wall outlet.

CAUTION

Use the supplied AC cable. Do not use other AC power

cables as doing so may result in ﬁre hazard or electrical

shock.

Getting Started

��