American Audio PPA-210 User Manual
©
American Audio
®
- www.americanaudio.us - PPA-210 Instruction Manual Page 9
23. EFF/AUX rETUrN JACK - Use this 1/4” jack to connect the output signal from a external effect
processor. This input stereo jack is designed to accept signals from an external effects machine. This
input can also be used as a stereo input with the output volume controlled by the MASTER VOLUME
knobs.
24. FOOT SWITCH JACK - You can connect a foot switch to this jack, and use the foot jack to toggle
the digital effects on/off.
25. rIGHT CHANNEL SEND/rETUrN JACK - This jack is used to patch in an equalizer, or other
processor into the PPA-210. The other end of the jack should be connected output of the external
device.
26. LEFT CHANNEL SEND/rETUrN JACK - This jack is used to patch in an equalizer, or other
processor into the PPA-210. The other end of the jack should be connected output of the external
device.
27. STErEO INPUT - Use this 1/8” mini jack to connect a tape player, cd player, dvd player, or any
other stereo source. You can also use this jack to connect the output of a computer sound card or
other similar device.
28. STErEO INPUTS - Use these 1/4” jacks to connect a tape player, cd player, dvd player, or any
other stereo source. You can also use this jack to connect the output of a computer sound card or
other similar device.
29. STErEO INPUTS - Use these RCA jacks to connect a tape player, cd player, dvd player, or any
other stereo source. You can also use this jack to connect the output of a computer sound card or
other similar device.
30. STErEO INPUT - Use this 1/4” jack to connect a tape player, cd player, dvd player, or any other
stereo source. You can also use this jack to connect the output of a computer sound card or other
similar device.
processor. This input stereo jack is designed to accept signals from an external effects machine. This
input can also be used as a stereo input with the output volume controlled by the MASTER VOLUME
knobs.
24. FOOT SWITCH JACK - You can connect a foot switch to this jack, and use the foot jack to toggle
the digital effects on/off.
25. rIGHT CHANNEL SEND/rETUrN JACK - This jack is used to patch in an equalizer, or other
processor into the PPA-210. The other end of the jack should be connected output of the external
device.
26. LEFT CHANNEL SEND/rETUrN JACK - This jack is used to patch in an equalizer, or other
processor into the PPA-210. The other end of the jack should be connected output of the external
device.
27. STErEO INPUT - Use this 1/8” mini jack to connect a tape player, cd player, dvd player, or any
other stereo source. You can also use this jack to connect the output of a computer sound card or
other similar device.
28. STErEO INPUTS - Use these 1/4” jacks to connect a tape player, cd player, dvd player, or any
other stereo source. You can also use this jack to connect the output of a computer sound card or
other similar device.
29. STErEO INPUTS - Use these RCA jacks to connect a tape player, cd player, dvd player, or any
other stereo source. You can also use this jack to connect the output of a computer sound card or
other similar device.
30. STErEO INPUT - Use this 1/4” jack to connect a tape player, cd player, dvd player, or any other
stereo source. You can also use this jack to connect the output of a computer sound card or other
similar device.
31. MIC INPUT JACKS - These are balanced 3-pin XLR-type input jacks.
32. LINE INPUT JACKS - These standard 1/4” TRS phone jack are used for balanced or unbal-
anced line level signals. Some examples of line level equipment include most electronic keyboards,
synthesizers, and line outputs from other mixers.
33. STErEO OUT JACKS - The stereo out RCA jacks provide a mix output that is independent of
the Master Level Controls. A recording device, such as a cassette or dAT recorder can be connected
to record your show. Changes made to input level controls, channel EQ, and echo controls will be
heard in the tape out mix. Changes made to the Master Level Controls will not effect the level of the
recording.
34. STErEO/DUAL SELECTOr SWITCH - In stereo mode, the system operates as a traditional
stereo power mixer/amplifier. In the dual mode, the channel level controls set the level for the Main
Mix (left master volume control). The Rev/Aux controls set the level for the Monitor (right master
volume control). When the Dual mode position is selected, the Pan and Balance controls will not
work.
35. SYSTEM EQUALIZEr - Adjusts the amount of frequency in the channel. The left and right
channels are adjusted simultaneously. When the equalizer is set the middle position, the frequency
response is “flat”. Sliding the equalizer up increases the frequency, sliding it down decreases it.
When setting the EQ start from the middle (0db).
32. LINE INPUT JACKS - These standard 1/4” TRS phone jack are used for balanced or unbal-
anced line level signals. Some examples of line level equipment include most electronic keyboards,
synthesizers, and line outputs from other mixers.
33. STErEO OUT JACKS - The stereo out RCA jacks provide a mix output that is independent of
the Master Level Controls. A recording device, such as a cassette or dAT recorder can be connected
to record your show. Changes made to input level controls, channel EQ, and echo controls will be
heard in the tape out mix. Changes made to the Master Level Controls will not effect the level of the
recording.
34. STErEO/DUAL SELECTOr SWITCH - In stereo mode, the system operates as a traditional
stereo power mixer/amplifier. In the dual mode, the channel level controls set the level for the Main
Mix (left master volume control). The Rev/Aux controls set the level for the Monitor (right master
volume control). When the Dual mode position is selected, the Pan and Balance controls will not
work.
35. SYSTEM EQUALIZEr - Adjusts the amount of frequency in the channel. The left and right
channels are adjusted simultaneously. When the equalizer is set the middle position, the frequency
response is “flat”. Sliding the equalizer up increases the frequency, sliding it down decreases it.
When setting the EQ start from the middle (0db).
PPA-210 CONTROLS ANd FUNCTiONS cont.