Denon DN-MC6000 User Manual
17
Basic operation
1
Press
POWER
.
The unit is powered ON, and
DECK CHG.
and the track selection
knob light up.
2
Select the input source for each channel using
channel input source switch knob.
For LINE1 and LINE2 input terminals, you can switch between
“PHONO” and “LINE”. For information about setting up these
terminals, see “Connecting external devices and MIC” in page
9.
“PHONO” and “LINE”. For information about setting up these
terminals, see “Connecting external devices and MIC” in page
9.
3
Use
LEVEL
to adjust the input level.
The input level is displayed in the CUE master level meter.
4
Use
HI/MID/LOW
to adjust the audio quality.
5
Use the channel fader and cross fader to adjust the
volume.
6
Use
MASTER LEVEL
to adjust the output level.
n
Adjust the cross fader curve
Adjusts the startup response of the cross fader.
Beforehand, use the cross fader assignment switch on the front panel
to set each channel to the cross fader A and B.
Beforehand, use the cross fader assignment switch on the front panel
to set each channel to the cross fader A and B.
Turn
X FADER CONTOUR
to adjust the curve response of
the cross fader.
: Slow startup curve characteristics (nine steps).
: Sharp startup characteristics, with cut-in/cut-out.
Basic operation
MIC (Mic input)
1
Press
MIC ON 1
to use MIC1 and
MIC ON 2
to use
MIC2.
When you press the button, it lights up and the MIC input is
switched ON.
switched ON.
2
Use
MIC1 LEVEL
or
MIC2 LEVEL
to adjust the MIC
input level.
3
Use
MIC1 HI/MID/LOW
or
MIC2 HI/MID/LOW
to
adjust the MIC audio quality.
n
Echoing the MIC input
q
Press
ECHO ON 1
to echo MIC1 and
ECHO ON 2
to echo MIC2.
• When you press the button, it lights up and the echo is
switched ON.
w
Press
ECHO ON 1
to echo MIC1 and
ECHO ON 2
to echo MIC2.
n
Enabling the ducking function
The ducking function detects the MIC input and attenuates the audio
signal level of the master output. This prevents MIC audio from being
inaudible under loud music.
Press
signal level of the master output. This prevents MIC audio from being
inaudible under loud music.
Press
DUCKING
.
•
DUCKING
lights up.
n
Outputting MIC audio to external devices
You can output MIC audio together with the master audio from the
booth/send and REC output terminals.
Press
booth/send and REC output terminals.
Press
POST
.
•
POST
lights up.
POWER
MIC1 HI/MID/LOW
PHONES
ECHO
PHONES
LEVEL
PAN
SPLIT CUE
CUE
クロスフェーダー
アサインスイッチ
クロスフェーダー
チャンネルフェーダー
MIC2 HI/MID/LOW
X FADER CONTOUR
LEVEL
POST
MIC1 LEVEL
MIC2 LEVEL
MIC ON 1/2
DUCKING
ECHO ON 1/2
HI/MID/LOW
DECK CHG.
チャンネル
入力ソース
切り替えつまみ
MASTER LEVEL
USBオーディオ出力切り替えスイッチ
ミキシングモード切り替えスイッチ
ミキシングモード切り替えスイッチ
DECK CHG.
トラック選択ノブ
This section describes operations of the unit without using the DJ software.
• For information about how to operate the DJ software, see the instruction manual for the DJ software or the help menu.
• For information about the buttons on the unit for operating the DJ software and their functions, see the following pages.
• For information about how to operate the DJ software, see the instruction manual for the DJ software or the help menu.
• For information about the buttons on the unit for operating the DJ software and their functions, see the following pages.
• TRACTOR······Page 3, 4
• Virtual DJ······Page 5, 6
• Virtual DJ······Page 5, 6
Channel fader
Cross fader
Track selection
knob
Cross fader
assignment switch
Mixing mode selector switch
USB audio output source selector switch
Channel input
source switch
knob