Denon DN-X1600 User Manual

Get

ting Star

Connections

Basic Oper

ations

Speciﬁ

cations

oubleshooting

fect
or F

unction

Fader Start

Utility

USB

fect
or F

unction

ENGLISH

Effecter Operations

Selecting the effector units and channels

With the input channels:

Using the

EFX SEND

button, select the effect units to be used. The

same effect can be selected for a multiple number of channels.

With the mic input and master output:

Using the

EFX INS

button, select the effect unit to be used. The

insertion operation is initiated and just the one channel is selected.

Setting the BPM

When the auto BPM counter is off, press the

TAP

button for over 1 second to turn the auto BPM
counter on.

When the auto BPM counter is on, press the

TAP

button and release it immediately. The data

measured with the auto BPM function is locked.

•

The channel for which the effect unit was last selected
using the

EFX SEND

EFX INS

button takes effect as the

channel used for the auto BPM counter measurement.

If the TAP button is pressed down for over 2 seconds,
the BPM value can be set directly by pressing the

BEAT

buttons.

The BPM value can be set by the interval during
which the

TAP

buttons are repeatedly pressed.

&'9

4&-&$5

&'9

0/0''

Setting the beat

Press the

BEAT

buttons to set the number

of beats.

When the

TIME

button is pressed, the mode is

changed to the time input mode.
The time can be adjusted by pressing the

BEAT

buttons.

When the

TIME

button is pressed again, the number

of beats setting mode is restored.

Selecting the effects

Turn the

EFX SELECT

controls to select the effect, and press the control

to enter the desired effect.

Turning the effects ON and OFF

When the

Effect ON/OFF

buttons are pressed, the effect is turned ON

or OFF.