Cary Audio Design Cinema 11a User Manual

 

 

29

 

6.  When the speaker check ends, the following VFD appears on the display. 

 
Total: 8 speakers (or however many speakers are connected) 

Press ENTER now 

 

The results of the speaker check will be displayed. The front panel shows confirmation of 

the number of speakers detected. If some speakers are not detected, make sure that 

they are all connected properly. After confirming the total number of speakers, press the 
ENTER button. 

 

7.  Set Distance 

During Set Distance testing, the following VFD appears on the display and checks are 

made to detect dart sound in the listening room (whether there are speakers connected 

to each channel or not) and the polarity of the speakers as they are connected. 
 

Set Distance 

FL .......................... 0.0ft 0.00m   (0.0ft to 100ft/ 0.00m to 30.3m) 

CEN ....................... 0.0ft 0.00m   (0.0ft to 100ft/ 0.00m to 30.3m) 

FR.......................... 0.0ft 0.00m   (0.0ft to 100ft/ 0.00m to 30.3m) 

SR ......................... 0.0ft 0.00m   (0.0ft to 100ft/ 0.00m to 30.3m) 
SBR........................ 0.0ft 0.00m   (0.0ft to 100ft/ 0.00m to 30.3m) 

SBL ........................ 0.0ft 0.00m   (0.0ft to 100ft/ 0.00m to 30.3m) 

SL.......................... 0.0ft 0.00m   (0.0ft to 100ft/ 0.00m to 30.3m) 

SW......................... 0.0ft 0.00m   (0.0ft to 100ft/ 0.00m to 30.3m) 

 

8.  Set Balance 

During Set Balance testing, the following VFD appears on the display and checks are 

made to detect the test sound in the listening room (whether there are speakers 

connected to each channel or not) and the polarity of the speakers as they are 

connected. 

 
Set Balance 

FL .................................. 0.0dB   -15.0dB to + 15.0dB 

CEN ............................... 0.0dB 

-15.0dB to + 15.0dB 

 

FR.................................. 0.0dB 

-15.0dB to + 15.0dB 

SR ................................. 0.0dB 

-15.0dB to + 15.0dB 

SBR................................ 0.0dB 

-15.0dB to + 15.0dB 

SBL ................................ 0.0dB 

-15.0dB to + 15.0dB 

SL.................................. 0.0dB 

-15.0dB to + 15.0dB 

SW................................. 0.0dB 

-15.0dB to + 15.0dB 

 

9.  Set Room EQ 

During Set Room EQ testing, the following VFD appears on the display and checks are 
made to detect the test sound in the listening room (whether there are speakers 

connected to each channel or not) and the polarity of the speakers as they are 

connected. 

 

Set Room EQ 

FL ............................. Set / N/A   -15.0dB to + 15.0dB 
CEN .......................... Set / N/A 

-15.0dB to + 15.0dB 

 

FR............................. Set / N/A 

-15.0dB to + 15.0dB 

SR ............................ Set / N/A 

-15.0dB to + 15.0dB