Avaya S8300 User Manual

Administer Communication Manager

Enter the names of up to six LSPs to be assigned to region 1. The LSP names must be the same as 
administered on the Node Names form.

Submit the form.

Repeat for each network region to which you want to assign LSPs.

This should have already been established as a part of normal S8500 or S8700 installation.

Type 

 to open the IP Interfaces screen.

Complete the fields as described the in the following table. 

change ip-interfaces procr                                    Page  1 of 1
 
                                   IP INTERFACES

Type: C-LAN
Slot: 01A03

Code/Suffix: TN799 d

Node Name: procr

IP Address: 135.9.41.146

Subnet Mask: 255.255.255.0

Gateway Address: 135.9.41.254

Enable Ehternet Port? y

Nework Region: 1

VLAN: 0

Number of CLAN Sockets Before Warning: 400

Type

Either C-LAN.

Slot

The slot location for the circuit pack.

Code/Suffix

Display only. This field is automatically populated with TN799 for C-
LAN.

Node name

The unique node name for the IP interface. The node name here must 
already be administered on the Node Names screen.

IP Address

The IP address (on the customer LAN) of the C-LAN.

Subnet Mask

The subnet mask associated with the IP address for this IP interface. 

For more information on IP addresses and subnetting, see 
“Administration for Network Connectivity for Avaya Communication 
Manager, 555-233-504”.

Gateway Address

The address of a network node that serves as the default gateway for 
the IP interface.