Avaya S8300 User Manual

Page of 370
4
Installing a New G700 without an S8300
Administer Communication Manager
202
Installation and Upgrades for G700 and S8300
December 2003
NOTE:
For information on installing the CLAN boards on the S8500 or S8700 port networks and 
complete information on installing an S8700 Media Server, see the Installation 
documentation on the ‘‘Avaya S8300, S8500, and S8700 Media Server Library CD, 555-
233-825.’’
Assign Node Names and IP Addresses for the 
C-LANs and LSPs
NOTE:
The CLAN boards must be TN799DP running version 5 or greater firmware. Be sure to 
check the firmware version for these boards on the S8700. For information on how to 
upgrade the firmware on the S8700, please see the section "Upgrade Firmware in Selected 
Port Cabinet Packs" in Upgrading the Avaya Media Server Configuration in the S8700 
documentation portion of this documentation CD, ‘‘Avaya S8300, S8500, and S8700 
Media Server Library CD
, 555-233-325.’’
Assign node names and IP addresses
1
At the SAT prompt, type 
change node-names ip 
to open the Node Names screen. 
Example Node Names Screen
2
Enter the name and IP address for the C-LANs and LSPs.
3
Press 
F 3
 (
E N T E R
) when complete.
Administer Network Regions
Before assigning an IP network region to a G700, you must define network region on the IP Network 
Region form. After a network region is defined, you can assign it to the various network elements 
(servers, gateways, IP phones).
The information you need to do this should be provided in your planning documentation. Use the system 
defaults if the planning documentation does not specify otherwise.
For a G700 with an S8300 LSP and an S8500 or S8700 as the primary controller, there may be more than 
one network region, since there can be up to 250 G700 Media Gateways connected to the S8500 or S8700 
with thousands of telephones in the network. In this case, you define a network region for each CLAN 
board on the S8500 or S8700 port networks, though they may also have the same network region.
The G700, in this case, may also share the same network region as the CLAN board(s). However, it may 
have a different network region because of the geographic distances of the connections between the G700 
change node-names ip
Page 1 of 1
                           
IP NODE NAMES
Name              IP Address          Name                IP Address
default_________
0__.0__.0__.0__ _______________
___.___.___.___
node-1-clan
 __  192.168.1 _.124 
_______________    ___.___.___.___
node-2-clan 192.168.1 _.97_
_______________    ___.___.___.___
node-10-lsp
192.168.1 _.50_
_______________    ___.___.___.___
node-11-lsp
192.168.1 _.51_
_______________    ___.___.___.___
__________ 
___.___.___.  _
_______________    ___.___.___.___
__________ 
___.___.___.  _
_______________    ___.___.___.___
__________ 
___.___.___.  _
_______________    ___.___.___.___