Avaya S8300 User Manual
5
Upgrading an Existing G700 with an S8300 — R1.x to R2.0
Upgrade the S8300
Upgrade the S8300
244
Installation and Upgrades for G700 and S8300
December 2003
Server Date/Time Window
2
Verify or set the media server’s time close enough to the NTS’s time, date, and time zone that
synchronization can occur (within about 5 minutes).
synchronization can occur (within about 5 minutes).
Install Post-Upgrade Communication Manager
Update File from Your Laptop, if any
Update File from Your Laptop, if any
NOTE:
Skip this procedure if there is no Communication Manager update file to install.
CAUTION:
The software update may or may not be call-preserving.
Use a telnet session to install the software update.
1
Click Start > Run to open the Run dialog box.
2
Type
telnet 192.11.13.6
and press
Enter
.
3
Log in with the initial
craft
ID and password. (You cannot use dadmin at this point.)
4
Type
cd /var/home/ftp/pub
and press
Enter
to access the pub directory.
5
At the prompt, type
ls -ltr
and press
Enter
to list files in the pub directory.
The media server displays a list of files in the FTP directory. Verify that the directory contains the
Communication Manager .tar.gz file you have uploaded, if any.
Communication Manager .tar.gz file you have uploaded, if any.
6
Type
sudo update_unpack
<
update>.tar.gz
, where <
update>
is the release or issue number of
the latest update file. (For example,
03.0.219.0-4925.tar.gz
). Press
Enter
.
7
Type
update_show
and press
Enter
to list Communication Manager files to verify the new
software file was installed.