Avaya S8300 User Manual
6
Upgrading an Existing G700 with an S8300 — R2.0 to R2.x
On-site Preparation for the Upgrade
On-site Preparation for the Upgrade
274
Installation and Upgrades for G700 and S8300
December 2003
6
Type
/vs/bin/util/vs_status
and press Enter to verify that AUDIX is shut down. When AUDIX is
shut down, you will see "voice system is down."
NOTE:
After the S8300 upgrade, you must upgrade the G700 and media module firmware before
restarting IA770.
restarting IA770.
Back up recovery system files
Before installing the S8300 software, you should back up the system data in case there’s a need to back
out of the upgrade. You should back up to an FTP server on the customer’s network. To do this, you need
an FTP address and directory path and a user ID and password to access the customer’s network. Check
with your project manager or the customer for this information. You can also back up the system data to
the S8300 hard drive.
out of the upgrade. You should back up to an FTP server on the customer’s network. To do this, you need
an FTP address and directory path and a user ID and password to access the customer’s network. Check
with your project manager or the customer for this information. You can also back up the system data to
the S8300 hard drive.