Gardner LCM IV User Manual
38
Standard programs
5.2.7 Power Management
1.
Press Power Management in "Instrument setup".
2.
Press Sleep Timer and then OK.
3.
Select the required time span after which the instrument will
go into energy-saving sleep mode if it is not used (refer to
go into energy-saving sleep mode if it is not used (refer to
), and confirm with OK.
4.
Press Power Off Timer and then OK.
5.
Select the required time span after which the instrument will
automatically be powered off if it is not used, and confirm with
OK
automatically be powered off if it is not used, and confirm with
OK
.
6.
Press OK to confirm the entry.
The instrument then returns to "Instrument Setup".
5.3
Save, recall, send and delete data
Up to 3000 color measured values (400 color measured values
for LCM IV) can be saved in the measured data memory.
for LCM IV) can be saved in the measured data memory.
In addition, the LCS IV can store 100 reference color
measurements, 1000 single and multi-wavelength
measurements, 20 wavelength scans and 20 time scans.
measurements, 1000 single and multi-wavelength
measurements, 20 wavelength scans and 20 time scans.
A complete record of the analysis is stored, including the Date,
Time, Results, Sample ID and Operator ID.
Time, Results, Sample ID and Operator ID.
5.3.1 Color values
Measurement results from the color measurement can be found
under Recall Data > Color Log.
under Recall Data > Color Log.