Gardner LCS IV User Manual

In the main menu, press the Wavelength Scan menu option. 
Press Options for Parameter Setup.

For further Options

Symbol: Store Data, if Instrument Setup > Data Log Setup > Auto Store: Off is selected.
Symbol: Recall Data, if Instrument Setup > Data Log Setup > Auto Store: On is selected.

From the displayed list of stored scans, a record is selected for use as a reference 
scan/superimposed scan. This can be highlighted or shown in the background in comparison 
with the actual measured scan.
Note: This option is only available when there are stored scans with the same wavelength range 
and step.



Enter the wavelength spectrum and scan interval

Enables the user to switch the display back and forth between the scan data tables 
(wavelength/absorbance) and the graph of the curve.
Note: "Select View" will be activated after the first reading.

To select Track or Peak/Valley. The selection for this menu item determines to which points on 
the graph the cursor moves.

To send data to a printer, computer or USB memory stick (Type A)

The integral gives the area and the derivative of the integral gives the original function

: In the automatic Scaling mode, the y-axis is automatically adjusted so that the total scan 

is displayed. 
The manual Scaling mode allows sections of the scan to be displayed. 
Units:

 Choice of absorbance or transmittance.

Recall saved measurement data, wave-length scans or time courses, see 

Basic data of the instrument, refer to