iON DM6 User Manual
1
FRONT PANEL FEATURES
1.
VOLUME – Adjusts the module's master volume
level.
level.
2.
VALUE +/- – Decreases or increases the value of
each parameter.
each parameter.
3.
TEMPO / TAP – Enters Tempo Adjustment
Mode.
Mode.
4.
PAD INDICATORS – Displays the pads currently
being played.
being played.
5.
CLICK – Turns the metronome on or off.
6.
DRUM OFF – Mutes or unmutes the drum part of
the song (Pattern) being played.
the song (Pattern) being played.
7.
START / STOP – Starts or stops the current
Pattern.
Pattern.
8.
PATTERN – Enters Pattern Select Mode where
you can select the Pattern and the MIDI output
format.
you can select the Pattern and the MIDI output
format.
9.
VOICE – Enters Voice Select Mode.
10.
KIT – Enters Kit Select Mode.
11.
LCD – Displays the current parameter values and indicator lights for Kit, Voice, and Pattern.
12.
VOLUME – Enters Volume Adjustment Mode to adjust the volumes of Kits, Voices, Patterns, and the
metronome separately.
13.
SAVE / REC – Press once to save the current Kit to a User Kit. Press and hold to enter Record Mode.
REAR PANEL FEATURES
1.
POWER IN – Connect the power adapter here,
then connect the adapter to wall power.
then connect the adapter to wall power.
2.
POWER SWITCH – Turns the module on or off.
3.
HEADPHONES – You can connect a set of 1/8"
headphones to this output.
headphones to this output.
4.
STEREO OUTPUT – You can connect an optional
speaker system, recording input, etc. to this 1/8"
output.
speaker system, recording input, etc. to this 1/8"
output.
5.
MIX INPUT – Connect the output of an external
audio source, such as a CD player, to this stereo
1/8" input.
audio source, such as a CD player, to this stereo
1/8" input.
6.
USB PORT – Connect this port to a computer or
other USB device with the included standard USB
cable.
other USB device with the included standard USB
cable.
7.
KICK TYPE SWITCH – Set this switch to select
the type of kick drum you are using with the
module. Select "SWITCH" if the kick pedal is a
simple footswitch. Select "PAD" if the kick pedal
is a velocity-sensitive pad (with a standard kick drum pedal).
the type of kick drum you are using with the
module. Select "SWITCH" if the kick pedal is a
simple footswitch. Select "PAD" if the kick pedal
is a velocity-sensitive pad (with a standard kick drum pedal).
8.
TRIGGER INPUT CONNECTION – Connect the included cable snake to this connector, then connect
the cables to their respective triggers. See the included separate Assembly Guide for setup
instructions.
the cables to their respective triggers. See the included separate Assembly Guide for setup
instructions.