Pentax R-315N User Manual

Page of 30
 
 
 
 
 
 
PRECAUTIONS REGARDING SAFETY
・・
 
 
       
WARNING 
Do not stare into the laser beam directly as this may result in damage to your eyes. 
R-300 is a Class II Laser product. The reflectorless type is a Class IIIa (3R) laser 
product. 
 
Do not look into the laser radiation aperture directly as this may result in 
damage to your eyes.   
 
Never use the telescope to view intense light such as direct sunlight or sun-light 
reflected through a prism as this may result in loss of sight. 
  Do not disassemble, modify or repair this product as there a risk of laser radiation. 
  Do not aim the laser beam at a person as it is harmful to the eyes and body. 
Receive the examination treatment by the doctor when the eyesight or body trouble is 
doubted by any chance. 
 Electro-Magnetic Compatibility (EMC): 
T
his instrument complies with the protection requirement for residential and commercial 
areas. If this instrument is used close to industrial areas or transmitters, the equipment can 
be influenced by electromagnetic fields.
 
 Do not use this product in a coal mine, in a location where there is a coal dust, or 
near flammable material as there is a risk of explosion.   
 Do not disassemble, modify or repair this product as there is a risk of fire, 
electric shock and burn injury. If you think the product requires repair, 
contact the retail outlet where you purchased it or an authorized repair site. 
 Only use the BC03 battery charger intended for this product as the battery 
charger. Use of another battery charger entails a risk of fire or burn injury 
from the battery bursting into flames due to possible differences in voltage 
or polarity. 
 Do not use a damaged electric cord plug or loose electric outlet when 
charging as there is a risk of fire or electric shock. 
 Do not charge the battery while covered by clothes or similar item as there 
is a risk of fire if the clothes ignite. 
 Do not use the battery or charger when wet as there is a risk of fire and 
burn injury due to short-circuit. 
 To prevent making short-circuit when removing the battery and charger from 
the case and storing them, apply electrically resistant tape to the poles of 
the battery. Storing the battery and charger as-is may result in fire or burn 
injury due to short-circuit. 
 Do not throw the battery into fire or expose it to heat as there is a risk of 
Injury if it explodes.