Agilent Technologies A.18.00 User Manual
434
S:\agilent\8920\8920b\PRGGUIDE\BOOK\CHAPTERS\callproc.fb
Chapter 8, Programming the Call Processing Subsystem
Using the Call Processing Subsystem’s Remote User Interface
Call Processing Subsystem HP-IB Error Messages
The Call Processing Subsystem HP-IB error messages are detailed in
through
Reading A Call Processing Subsystem HP-IB Error Messages
If an error occurs while in the Call Processing Subsystem, an appropriate error
message will be placed in the Error Message Queue. The control program can
read the Error Message Queue to retrieve the error message. See
message will be placed in the Error Message Queue. The control program can
read the Error Message Queue to retrieve the error message. See
for detailed information on the Error Message Queue.
If an error occurred while attempting to decode data messages received from the
mobile station on the reverse control channel or reverse voice channel, the raw
data message bits are displayed in hexadecimal format in the upper right hand
portion of the
mobile station on the reverse control channel or reverse voice channel, the raw
data message bits are displayed in hexadecimal format in the upper right hand
portion of the
CALL CONTROL
screen.
shows the layout of the
CALL CONTROL
screen when a
, for information on how to
read data in the upper right hand portion of the
CALL CONTROL
screen.
Figure 33
CALL CONTROL Screen with Decoding Error Message Display