Manualsbrain.com
  1. Manuals
  2. Brands
  3. Omega
  4. CNI32
  5. User Manual

Omega CNI32 User Manual

Download
Page of 72
17
3.2.2 Set Points
SETPOINT 1:
Press 
a
1) Press 
a, if necessary until SP1 prompt appears.
Press 
d
2) Display shows previous value of “Setpoint 1”.
Press 
b & c 3) Press b and c to increase or decrease Setpoint 1
respectively.
Holding 
b & c buttons down for approximately 3 seconds will speed up the
rate at which the Setpoint value increments or decrements.
Press 
b & c 4) Continue to use b and c to enter your 4-digit Setpoint 1 value.
Press 
d
5) Display shows 
STRD stored message momentarily and then
advances to 
SP2 only, if a change was made, otherwise press
a to advance to SP2 Setpoint 2 Menu.
SETPOINT 2:
Press 
d
6) Display shows previous value of “Setpoint 2”.
Press 
b & c 7) Press b and c to increase or decrease Setpoint 2
respectively. 
Holding 
b & c buttons down for approximately 3 seconds will speed up
the rate at which the setpoint value increments or decrements. 
Press 
d
8) Display shows 
STRD stored message momentarily and then
advances to 
CNFG only, if a change was made, otherwise press
a to advance to CNFG Configuration Menu.