Omega CNI8 User Manual

54

Includes a byte in the data string to indicate whether reading is in Celsius or
Fahrenheit.

Press  

d

50) Display flashes previous selection for 

UNIT.

Press  

b

51) Scroll through the available selections: NO, YES.

Press  

d

52) Display shows 

STRD stored message momentarily and then

advances to 

ADDR only, if it was changed, otherwise press a to

advance to

ADDR Address Setup Submenu.

This menu is applicable to the RS-485 Option only.

Press  

d

53) Display advances to “Address Value” (0000 to 0199) Submenu.

Press  

d

54) Display flashes 1

st

digit of previously stored Address Value.

Press  

b & c 55) Press b and c to enter new “Address Value”.

Press  

d

56) Display shows 

STRD stored message momentarily and then

advances to 

TR.TM only, if it was changed, otherwise press a to

advance to 

TR.TM Transmit Time Interval Submenu.

This menu is applicable if “Continuous” Mode was selected in the “Data
Flow Mode” Submenu and the device is configured as an RS-232C
Standard device. Also, one or more options under the Data Format
Submenu must be enabled.

Press  

d

57) Display advances to “Transmit Time Value” Submenu.

Determines the interval at which data will be emitted to the RS-232 Serial Bus
when the instrument is in Continuous Data Flow Mode.

Press  

d

58) Display flashes 1

st

digit of previous “Transmit Time Value” in

seconds.

Press  

b & c 59) Press b and c to enter new “Transmit Time Value”, e.g.

0030 will send the data every 30 seconds in Continuous Mode.

Press  

d

60) Display shows 

STRD stored message momentarily and then

advances to 

COLR only, if it was changed, otherwise press a to

advance to

COLR Color Display Selection Menu.