Oregon Scientific 086L004438-013 User Manual
8
EN
ICE WARNING
If the channel 1 sensor falls between 3°C to –2°C (37°F
to 28°F), flashes to warn you that the temperature is
approaching freezing.
to 28°F), flashes to warn you that the temperature is
approaching freezing.
NOTE The warning will automatically stop if the
temperature goes outside the ice-warning range.
temperature goes outside the ice-warning range.
TEMPERATURE, HUMIDITY AND PRESSURE TREND
The temperature, humidity and pressure trend icons are
based on recent sensor readings.
based on recent sensor readings.
RISING
STEADY FALLING
HI / LO TEMPERATURE / HUMIDITY ALARMS
HEAT INDEX
The heat index combines temperature and humidity data
to describe the actual temperature felt.
WARNING HEAT INDEX MEANING
to describe the actual temperature felt.
WARNING HEAT INDEX MEANING
Extreme
danger
danger
Strong risk of
dehydration / sun
stroke
dehydration / sun
stroke
54.5°C / (130°F)
or above
or above
Danger
Heat exhaustion
likely
likely
40.5 - 54°C
(105 - 129°F)
(105 - 129°F)
Extreme
caution
caution
Possibility of heat
dehydration
dehydration
32.2 - 40°C
(90 - 104°F)
(90 - 104°F)
Caution
Possibility of heat
exhaustion
exhaustion
26.6 - 31.7°C
(80 - 89°F)
(80 - 89°F)
To end auto-scan:
Press CHANNEL or MEM.
Press CHANNEL or MEM.
To toggle between current, minimum and maximum
records for the selected sensor:
Press MEM repeatedly.
records for the selected sensor:
Press MEM repeatedly.
To clear the records:
Press and hold MEM for 2 seconds.
Press and hold MEM for 2 seconds.
To set alarm ON / OFF:
1. Press and hold TEMP / HUMIDITY HI / LO .
2. Use and to select high / low temperature /
1. Press and hold TEMP / HUMIDITY HI / LO .
2. Use and to select high / low temperature /
humidity alarm. Press TEMP / HUMIDITY HI / LO
to confirm.
to confirm.
3. Press / to set alarm ON / OFF and press TEMP
/ HUMIDITY HI / LO to confirm.
4. If alarm has been activated, use and to select
the temperature / humidity.
5. Press TEMP / HUMIDITY HI / LO to confirm.
To silence the hi / lo alarm:
Press any key. The alarm resets automatically and will
resound if the hi / lo temperature is recorded again.
Press any key. The alarm resets automatically and will
resound if the hi / lo temperature is recorded again.
Temperature and humidity alerts can be set to sound
if sensor set to channel 1 records above or below a
temperature/humidity of your choice.
if sensor set to channel 1 records above or below a
temperature/humidity of your choice.