Sennheiser SK 2000 User Manual
12
Using the bodypack transmitter
To
activate
the
RF signal
:
To switch the bodypack transmitter
off
:
왘
If necessary, deactivate the lock mode (see next chapter).
Deactivating the lock mode temporarily
You can activate or deactivate the automatic lock mode via the “
Auto
Lock
” menu item (see page 23). If the lock mode is activated, you have to
temporarily deactivate it in order to be able to operate the bodypack
transmitter:
transmitter:
왘
Press the
SET
button.
The transmission frequency is displayed but the bodypack
transmitter does not transmit an RF signal. The transmission
icon
transmitter does not transmit an RF signal. The transmission
icon
is not displayed. When the pilot tone function is
activated on both bodypack transmitter and receiver,
“
“
RF Mute
” appears on the receiver’s display panel.
Use this function to save battery power or to prepare a bodypack
transmitter for use during live operation without causing inter-
ference to existing transmission links.
transmitter for use during live operation without causing inter-
ference to existing transmission links.
왘
Press the
ON
/
OFF
button.
“
RF Mute Off
” appears on the display panel.
왘
Press the
SET
button.
The transmission icon
is displayed again.
왘
Keep the
ON
/
OFF
button
pressed until “
OFF
” appears on
the display panel. The red
ON
LED
goes off and the display
panel turns off.
When in the operating menu, pressing the
ON
/
OFF
button
will
cancel your entry (ESC function) and return you to the current
standard display.
standard display.
왘
Press the
SET
button or the
ON
/
OFF
button.
“
Locked
” appears on the display panel.
왘
Press the rocker button.
“
“
Unlock?
” appears on the display panel.
SET
MHz
543.200
**2000**
**2000**
MUTE
P
AF
ON/OFF
SET
ON/OFF
SET
ON/OFF