Sennheiser SK 2000 User Manual
23
Adjusting settings via the operating menu
Activating/deactivating the automatic lock mode – “Auto Lock”
The lock mode prevents that the bodypack transmitter is accidentally
switched off or programed during operation. The lock mode icon
switched off or programed during operation. The lock mode icon
on
the current standard display indicates that the lock mode is activated.
For information on how to use the lock mode, refer to page 12.
The extended menu “
Advanced Menu
“
Setting the transmission frequencies and the frequency banks
“U1” to “U6” – “Tune”
“U1” to “U6” – “Tune”
Via the “
Tune
” menu item, you can:
1. set a transmission frequency to be stored in the current channel of the
frequency bank (“
U1
” to “
U6
”)
2.
or
select a frequency bank (“
U1
” to “
U6
”) and a channel and assign this
channel a transmission frequency.
왘
Press the rocker button to select the desired setting.
When you have selected one of the system banks and then select
the “
the “
Tune
” menu, the bodypack transmitter automatically
switches to channel 1 of the frequency bank “
U1
”. In this case,
“
U1.1
” briefly appears on the display panel.
Upon delivery, the channels of the frequency banks “
U1
” to “
U6
”
are not assigned a transmission frequency.
When you are in the “
Tune
” menu item, the RF signal is deacti-
vated.
It is vital to observe the notes on frequency selection on page 28.
A c t i v e
Auto Lock
Active
Auto Lock
I n a c t i v e
Auto Lock
Menu
“Stored”
Call up
“Auto Lock”
Select the desired
setting
Store the setting