MTD 250 Series User Manual

Insert the left end of the tine clutch control into the hole on 

the left side of the upper handle. See Fig. 3-3.

Insert the Z-fitting on the clutch cable into the hole on the 

tine clutch control. Hook the “Z” end into the opening from 

the inside to the outside as shown in Fig. 3-4.

4.

5.

Squeeze the tine clutch control inward. Insert the right end 

into the hole on the right side of the upper handle. See Fig. 

3-5.

Service the engine with gasoline and oil as instructed in the 

separate engine manual packed with your tiller. Read the 

instructions carefully.

Use extreme care when handling 

gasoline. Gasoline is extremely flammable and the 

vapors are explosive. Never fuel machine indoors or 

while the engine is hot or running.

6.