Fisher 244ER User Manual
Rosemount Models 244EH and 244ER PC-Programmable Temperature Transmitters
A-8
Ordering Flameproof and
Explosion-proof Approvals
for Temperature
Assemblies
Explosion-proof Approvals
for Temperature
Assemblies
Both flameproof and explosion-proof protection depend on the enclosure
type. Compliance with flameproof and explosion-proof approvals
requires an appropriately approved assembly, including the sensor. The
Model 244EH requires an appropriate enclosure for approved use in
locations requiring flameproof or explosion-proof installations.
type. Compliance with flameproof and explosion-proof approvals
requires an appropriately approved assembly, including the sensor. The
Model 244EH requires an appropriate enclosure for approved use in
locations requiring flameproof or explosion-proof installations.
Orders that include enclosure options J5 or J6 must be ordered from
the Model 244EH ordering information table.
the Model 244EH ordering information table.
When ordering a complete DIN style assembly, select the appropriate
connection head from Volume 2 of the Rosemount Temperature Sensors
and Accessories PDS (document number 00813-0101-2654).
connection head from Volume 2 of the Rosemount Temperature Sensors
and Accessories PDS (document number 00813-0101-2654).
Standard Configuration
Unless specified, transmitter will be shipped as follows:
Custom Configuration
The transmitter can be ordered with custom configuration. Use
Table A-7 to determine the requirements when specifying the custom
configuration.
Table A-7 to determine the requirements when specifying the custom
configuration.
Tagging
Standard Configuration
(1)
(1) All standard configuration settings may be changed in the field with the Model
244EC Configuration Interface.
Sensor Type:
RTD, PT 100 (
α
= 0.00385, 4-wire)
4 mA Value:
0 °C
20 mA Value:
100 °C
Damping:
5 seconds
Failure Mode:
High/Upscale
LIne Voltage Filter:
50 Hz
Tag
See “Tagging” below
TABLE A-7. Custom Configuration Requirements/Specification.
Option Code
Requirements/Specification
A1: NAMUR-compliant
CN: NAMUR-Compliant, Low Alarm
C4: Five Point Calibration
Will include five-point calibration at 0, 25, 50, 75,
and 100% analog and digital output points. Use
with Rosemount Calibration Certificate Q4.
and 100% analog and digital output points. Use
with Rosemount Calibration Certificate Q4.
F6: 60 Hz Line Filter
Calibrated to a 60 Hz line voltage filter instead of
the standard 50 Hz filter
the standard 50 Hz filter
Hardware Tag
Software Tag
• No charge
• Tagged in accordance with customer
• Tagged in accordance with customer
requirements
• Tags are adhesive labels
• Permanently attached to transmitter
• Character height is
• Permanently attached to transmitter
• Character height is
1
/
16
-in (1.6 mm)
• The transmitter can store up to 30
characters in its memory
• Transmitter can be ordered with different
software and hardware tags
• If the software tag characters are not
specified, the software tag will default
to the first 30 characters of the
hardware tag.
to the first 30 characters of the
hardware tag.