La Crosse Technology 2800 series User Manual
3. The Heavy Weather Pro software is installed.
IF YOU HAVE NOT YET INSTALLED THE HEAVY WEATHER PRO SOFTWARE, please refer to the section on
Ok, if the things listed above are complete, let’s begin the synchronization of our weather station with our
computer (USB device)! To do this, we need to:
computer (USB device)! To do this, we need to:
1.
2.
PUTTING THE HEAVY WEATHER PRO SOFTWARE IN SYNCHRONIZE MODE
SYNCHRONIZING DURING (OR IMMEDIATELY AFTER) INSTALLATION
If you begin the synchronizing process directly from the installation, you will see a dialog on your computer like the
one below.
one below.
If you see this dialog, skip to the section on
.
SYNCHRONIZING ANY TIME (OTHER THAN DURING INSTALLATION OF THE SOFTWARE)
If for any reason the weather station and USB communication device/software lose connection with each other
(replacing the batteries, shut down of the computer, etc), or if you are setting up the Heavy Weather Pro software
for the first time and did not synchronize with the software during installation, you can always redo the
synchronization.
(replacing the batteries, shut down of the computer, etc), or if you are setting up the Heavy Weather Pro software
for the first time and did not synchronize with the software during installation, you can always redo the
synchronization.
To start the synchronization process manually:
• Locate the menu bar at the top of the Heavy Weather
Pro software application.
• Click the “Extras” menu choice.
• Select “Resynchronize”.
P a g e
| 12