La Crosse Technology 2800 series User Manual

IF SYNCHRONIZATION IS NOT SUCCESSFUL

If the synchronization process is not successful; you will see a message
similar to the one to the right. At this point, you will need to retry the

EPEATING THE SYNCHRONIZATION PROCESS

synchronization.

To repeat the synchronization process, we need to put bo
weather station and the software into synch mode again. To

th the

do this press

the

the down arrow on the display, then

software).

click the Synchronize button on the ‘Synchronize message box (on

Please refer to the preceding sections for details on the synchronization process.

OPERATION

This section covers the operation of your Heavy Weather Pro software application.

Note: In this document, we will not address the operation of your weather station, except where it

pertains to the Heavy Weather software application. For more information regarding the operation of
your

fic

La Crosse Technology® weather station, please refer to the documentation provided for your speci

model.

MAIN W

INDOW

The main window of Heavy Weather Pro is where you can review all of the weather attributes reported from your
weather station.

Graphs since that is where it is mainly used.

at Current Weather, this window will show all

The left side of the main window is referred to as the File Management window. We talk more about this in the
section on Charts and

The right side of the main window is a tabbed dialog, which means it can display several windows at once, with
each window distinguished by a tab at the top. When we are looking
of the weather properties collected from the internal and external sensors. This section will talk about those
properties in detail.

P a g e

| 15