KUHN RIKON 30-100 User Manual

1.  Carefully finish removing all contents from shipping carton. Compare contents of the 

shipping carton with the list shown on page 5. Place parts on a protected surface.

2.  Report any shipping damage to your local distributor. If parts are missing contact 

RIKON customer service at 877-884-5167 or techsupport@rikontools.com.

3.  Clean all rust protected surfaces.  

Do not use; gasoline, paint thinner, mineral spirits, 

etc. These may damage painted surfaces.  

4.  Set packing material and shipping carton to the side.  

Do not discard until machine 

has been set up and is running properly.

7

1. Install the column to the base using the three 

    column mounting bolts. (Fig.01)

2. Next install the table lock handle through the 

    unthreaded hole on the left of the table 

    support casting. The handle should engage 

    the thread on the right side of the table 

    support casting. (Fig.02)

The machine must not be plugged in and the power switch must be in the OFF position 

until assembly is complete.

 

 

 

 

      Phillips Screwdriver

 

 

      Adjustable or 13mm Wrench