APC 412 kVA User Manual

25  

 

 

 

 

 
 

 

1.  Install all power modules. Power modules  

can be installed in any slot on the left side of 
the UPS. 

•

 

Slide the power module into the frame. 

•

 

Slide the latch 

 up and tighten the 

captive screw 



.  

 

 

 

 

 
 

Two people are required to lift, 
move, install, or remove battery 
modules due to its weight. 

 

Do not install battery modules 
until you are ready to power up 
the UPS. Batteries can be 
permanently damaged if loaded 
prematurely. 

2.  Install all battery modules on the right side of 

the UPS.  

•

 

Slide the battery module into the frame 
until the safety latch 

 engages.  

•

 

Slide the latch 



 up and tighten the 

captive screw 



.