DeWALT VL-MR4 Leaflet

The Hawk-Woods MR (Multi Resource) battery charger features include,

•

Universal Mains Input

•

Charging of all V-Lok Ni-Cad, Ni-Mh and Lithium Batteries

•

Compatible with Sony batteries

•

Able to charge NP1s using Hawkwoods adaptor

•

13.8V 60Watt AC Adaptor (PSU)

•

12V In-Car vehicle charging

•

Revitalise battery function

Mains Input:  Suitable for worldwide use (90-260VAC 50~60Hz). This product is class 1 and 
must be earthed. These chargers are CE marked and have been designed to comply with all 
relevant safety/EMC regulations.     

  

The VL-MR4 is a four channel sequencer quick charger, and suitable for 

charging the following battery types,

•

Any NP1 Ni-Cad or Ni-Mh battery. (12-14V 1.5-4Ah)

•

Hawk-Woods Lithium Ion NP50/NP60/NP65 battery packs. (14.4V 50-60-65Watts)

•

All V-Lok battery chemistries

•

Suitable for charging Sony type V-Mount batteries

 

Recharge time – Fully Discharged V-lok battery packs

VL-32  

V-Lok 13.2V 32 W Battery Pack (Ni-Cad) 

 

 

75 mins

VL-65  

V-Lok 14.4V 65 Watt Battery Pack (Li-Ion) 

 

 

220 mins

VL-100 

V-Lok 14.4V 100 Watt Battery Pack (Li-Ion) 

 

 

270 mins

VL-160 

V-Lok 14.4V 160 Watt Battery Pack (Li-ion) 

 

 

340 mins

Charger Use:  Select mains input via the rocker switch located on the rear of the VL-MR4. 
Select charger function on the front of the unit. Connect the (Earthed) IEC mains cord supplied 
and the RED charger LED will come on. Connect a suitable battery/batteries into the VL-MR4 for 
charge.

Yellow  

 

 

Battery has been accepted  and is Charging

Yellow/Green  

Both LEDs flashing   

Faulty/Disconnected

Green  

 

 

Battery Charging complete Ready

Yellow – Green 

(LEDs alternately on/off = 80% charged or more for Lithium’s Only).

In-Car Charging: Check suitability of both the vehicle being used and it’s wiring before use.
Do not cover vents whilst in use!

•

DC Input: 11-15Volts.

•

Protection against reverse polarity fitted.

•

Low voltage detection/Indication.