Grizzly G0463 User Manual

G0463 Small Mill/Drill

-13-

Workbench Load

Although adjustable feet are included with your
mill/drill, It is strongly recommended you bolt your
machine to a sturdy workbench that will not tip.
Refer to the

Machine Data Sheet for the weight

and footprint specifications of your machine.
Some workbenches may require additional rein-
forcement to support both the machine and the
workpiece.

Working Clearances

Consider existing and anticipated needs, size of
material to be processed through each machine,
and space for auxiliary stands, work tables or
other machinery when establishing a location for
your new machine. See

Figure 5 for the minimum

working clearances.

Unsupervised children and

visitors inside your shop

could cause serious per-

sonal injury to themselves.

Lock all entrances to the

shop when you are away and

DO NOT allow unsupervised

children or visitors in your

shop at any time!

The  unpainted  surfaces  are  coated  with  a  waxy
oil  to  protect  them  from  corrosion  during  ship-
ment. Remove this protective coating with a sol-
vent  cleaner  or  citrus-based  degreaser  such  as
Grizzly’s G7895 Degreaser. To clean thoroughly,
some parts may need to be removed.

For opti-

mum performance from your machine, make

sure you clean all moving parts or sliding

contact  surfaces  that  are  coated.  Avoid  chlo-
rine-based  solvents,  such  as  acetone  or  brake
parts cleaner, as they may damage painted sur-
faces should they come in contact. Always follow
the  manufacturer’s  instructions  when  using  any
type of cleaning product.

Site Considerations

Clean Up

Gasoline and petroleum

products have low flash

points and could cause

an explosion or fire if

used to clean machinery.

DO NOT use gasoline or

petroleum products to

clean the machinery.

Many of the solvents

commonly used to clean

machinery can be toxic

when inhaled or ingest-

ed. Lack of ventilation

while using these sol-

vents could cause seri-

ous personal health risks

or fire. Take precautions

from this hazard by only

using cleaning solvents

in a well ventilated area.

Figure 5. Minimum working clearances.

⁄

30"