Grizzly G0794 User Manual

-16-

Model G7943/G7944 (Mfg. 10/02+)

Figure 5. Working clearances.

Floor Load

Refer to the

Machine Data Sheet for weight and

footprint specifications for your machine. Some
residential floors may require additional reinforce-
ment to support both the machine and operator.

Working Clearances

Consider existing and anticipated needs, size of
material to be processed through each machine,
and space for auxiliary stands, work tables or
other machinery when establishing a location
for your machine. See

Figure 5 for the minimum

working clearances of the Model G7943/G7944.

Unsupervised children and

visitors inside your shop

could cause serious per-

sonal injury to themselves.

Lock all entrances to the

shop when you are away and

DO NOT allow unsupervised

children or visitors in your

shop at any time!

The  unpainted  surfaces  are  coated  with  a  waxy
oil  to  protect  them  from  corrosion  during  ship-
ment. Remove this protective coating with a sol-
vent  cleaner  or  citrus-based  degreaser  such  as
Grizzly’s G7895 Degreaser. To clean thoroughly,
some parts may need to be removed.

For opti-

mum performance from your machine, make
sure you clean all moving parts or sliding
contact surfaces that are coated.  Avoid  chlo-
rine-based  solvents,  such  as  acetone  or  brake
parts cleaner, as they may damage painted sur-
faces should they come in contact. Always follow
the  manufacturer’s  instructions  when  using  any
type of cleaning product.

Site Considerations

Clean Up

Gasoline and petroleum

products have low flash

points and could cause

an explosion or fire if

used to clean machinery.

DO NOT use gasoline or

petroleum products to

clean the machinery.

Many of the solvents

commonly used to clean

machinery can be toxic

when inhaled or ingest-

ed. Lack of ventilation

while using these sol-

vents could cause seri-

ous personal health risks

or fire. Take precautions

from this hazard by only

using cleaning solvents

in a well ventilated area.

24"

14"