Grizzly G0794 User Manual

Model G7943/G7944 (Mfg. 10/02+)

-19-

Components and Hardware Needed:

Qty

Headstock...........................................................1

The headstock must be mounted on the col-
umn/base assembly before the drill press can be
operated. Moving and installing the headstock is
a two-person job.

Headstock

To mount the headstock onto the column:

1. Loosen the two set screws on the right side of

the headstock enough so they are flush with
the inside pocket of the headstock.

2. With the help of an assistant, lift the head-

stock assembly above the column, and gently
slide it down the column as far as it will go.

The headstock is very

heavy. You MUST have

assistance when moving,

lifting or mounting the

headstock on the column

and base assembly.

NOTICE

Do NOT force the headstock onto the col-

umn! If you do, you could damage the head-

stock and the column.

3. Suspend a plum bob from the center of the

headstock spindle so it is over the tape/ruler
as shown in

Figure 12.

4. Center the headstock directly over the base

as indicated by the plum bob and ruler.

Figure 12. Aligning headstock with base.

5. Tighten the two headstock setscrews to the

column, as shown in

Figure 13.

Figure 13. Securing headstock to column.