Grizzly G0794 User Manual

Model G7943/G7944 (Mfg. 10/02+)

-25-

Loose hair and cloth-

ing could get caught in

machinery and cause seri-

ous personal injury. Keep

loose clothing and long

hair away from moving

machinery.

Installing/Removing

Drill Bits

Operation Safety

Any drill bit you install in the chuck must be tight
enough that it will not come loose during opera-
tion.

To install a drill bit:

1. UNPLUG THE DRILL PRESS!

2. Open the drill chuck wide enough to accept

the shank of the drill bit.

3. Insert the drill bit as far as possible into the

chuck WITHOUT allowing the chuck jaws to
touch the fluted portion of the bit, and hand
tighten the chuck.

Note: Make sure small bits are not trapped
between the edges of two jaws; if they are,
reinstall the drill bit or it will not be secure
enough to use for drilling.

4. Final tighten the drill bit with the chuck key.

To remove a drill bit:

1. UNPLUG THE DRILL PRESS!

2. Use the chuck key to open the drill chuck,

and catch the drill bit with a rag to protect
your hands.

SECTION 4: OPERATIONS

NOTICE

If you have never used this type of machine

or equipment before, WE STRONGLY REC-

OMMEND that you read books, trade maga-

zines, or get formal training before begin-

ning any projects. Regardless of the con-

tent in this section, Grizzly Industrial will

not be held liable for accidents caused by

lack of training.

Wear safety glasses when

operating this machine.

Serious injury may occur if

this warning is ignored!

Switch/Lockout

The ON/OFF switch can be locked-out to prevent
unauthorized use.

To use the switch:

1. To turn the drill press ON, flip the switch up.

2. To turn the drill press OFF, press the switch

down.

3. To lock-out the switch, remove the yellow key

from the switch housing, as shown in

Figure

24. Place the key in a safe place.

Figure 24. Locking-out.