Xantrex Technology 806-1054-01 User Manual

975-0390-01-01

7

Features

For instructions on how to enable or disable Ignition Control, see the 
Installation Guide.

1

Inverter Power button is the main unit switch that turns the Freedom HF’s 
inverter function ON or OFF. See page 15 for additional information.

2

Three-digit LED display screen shows status information and fault codes. 
See page 15 for additional information.

3

Status LED indicates the mode of operation with a three-color LED. See 
page 15 for additional information.

4

Select button changes status information displayed on the display screen. See 
page 15 for additional information.

IMPORTANT: See “Display Panel Operation” on page 15 starting on page 15 for detailed 
information on operating the panel’s buttons.

Input Voltage (V)

Select

STATUS

Battery

Fault

Utility

Input Current (A)
Output Power (kW)

1

Remote jack is used for connecting the Display panel that ships with the 
Freedom HF 1055 EMS and 1800 EMS. Each shipment comes with a 25-foot 
communications cable as well.

2

Power module has one fuse and three contacts for wires that connect to:

•

an auxiliary 12-volt DC OUT terminal,

•

an Ignition Control terminal, and

•

a Disabled terminal.
NOTE: The Ignition Control and Disabled terminals are connected 
by a jumper wire that acts to disable ignition control. Removing the 
jumper wire will enable ignition control.

Freedom HF InvChg Owners Guide.book  Page 7  Tuesday, April 29, 2014  12:10 PM