Zebra Technologies RP User Manual

5

UMAN-Charge

The UCLI72-4 Quad Charger is designed to charge up to

four Lithium-Ion (LIon) QL series Mobile Printer battery
packs simultaneously.  The unit is supplied with an external
110/220 VAC power supply and a line cord compatible with
its country of use.

Place the Quad Charger on a surface near an A.C. outlet.

There are four mounting holes in the bottom of the charger

which allow it to be secured to a table or

shelf to help ensure the charging process

will not be interrupted by someone

inadvertently moving or unplugging

either the charger or the battery

packs under charge.

Plug the circular four pin plug

from the power supply into the

back of the charger. Plug

one end of the AC cord

into the Power Supply
and the other into the
A.C. power source.  The
power indicator on the

front panel should come
on, indicating the Quad
Charger is ready for use.
Please refer to Figure 2.

Ensure that the power

indicator on the front
panel is on.

Plug a battery pack into

any one of the four
charging bays as shown.