Grizzly G0441 User Manual

Model G0440/G0441 (Mfg. Since 03/12)

-35-

Damage to your eyes, lungs, and ears could

result from using this machine without

proper protective gear. Always wear safety

glasses, a respirator, and hearing protection

when operating this machine.

SECTION 5: OPERATIONS

NOTICE

If you have never used this type of machine

or equipment before, WE STRONGLY REC-

OMMEND that you read books, trade maga-

zines, or get formal training before begin-

ning any projects. Regardless of the con-

tent in this section, Grizzly Industrial will

not be held liable for accidents caused by

lack of training.

To reduce the risk of

serious injury when using

this machine, read and

understand this entire

manual before beginning

any operations.

Loose hair, clothing, or

jewelry could get caught

in machinery and cause

serious personal injury.

Keep these items away

from moving parts at all

times to reduce this risk.

Remote Control

The remote control for the Model G0440/G0441
is IR (infrared) rather than RF (radio frequency) to
prevent accidental startups by other common RF
items, such as garage door openers.

Because this remote system is IR, you must point
the remote control directly at the switch to make
it operate.

If you plan on placing your dust collector in a dif-
ferent room or outside of your shop, you must
mount the switch in the shop and wire it through
the wall to the dust collector to make use of the
remote control.

Operating the Model G0440/G0441 is simple and
straightforward. Turn the dust collector

ON, then

turn the machine

ON. When you are finished with

the machine operation, turn the machine

OFF,

then turn the dust collector

OFF.

Blast gates can be used at the start of each branch
line to control the air flow from the woodworking
machine to the dust collector. If a machine is not
being used, keep the blast gate closed to maintain
higher levels of efficiency throughout the system.

General