ZyXEL Communications vantage cnm User Manual
Vantage CNM User’s Guide
59
C
H A P T E R
5
Device Network Settings
The screens explained network settings such as LAN, WAN, wireless card.
The menus and screens may vary for different ZyXEL products. For example, click Device
Configuration > Network Interface for ZLD-based device’s network settings. This
document uses the ZyNOS ZyWALL settings for each screen description. For ZLD-based
settings, please see device’s User’s Guide for the detailed information. An example is shown
next.
The menus and screens may vary for different ZyXEL products. For example, click Device
Configuration > Network Interface for ZLD-based device’s network settings. This
document uses the ZyNOS ZyWALL settings for each screen description. For ZLD-based
settings, please see device’s User’s Guide for the detailed information. An example is shown
next.
Figure 26 Example: Device Operation > Device Configuration > Network > Interface (ZLD)
5.1 LAN (ZyNOS ZyWALL)
"
This section refers only to the LAN screen, but the information is applicable for
the LAN, WLAN, and DMZ screens.
the LAN, WLAN, and DMZ screens.
Use this screen to configure the DHCP settings, TCP/IP settings, and NetBIOS settings for the
LAN on a ZyNOS ZyWALL. To open this screen, click Device Operation in the menu bar,
and click Device Configuration > Network > LAN > LAN in the navigation panel.
LAN on a ZyNOS ZyWALL. To open this screen, click Device Operation in the menu bar,
and click Device Configuration > Network > LAN > LAN in the navigation panel.