Pelco C1510M-A User Manual

Pelco Manual C573M-D (11/03)

25

The CM9760-MDA SETUP dialog box, Figure 17, is the main window of the CM9760-MDA
Setup program. Menus at the top of the dialog box let you access other menus and operation
windows. The following sections provide detailed information about the functions that can
be performed using the CM9760-MDA SETUP dialog box:

•

The 

Set Password 

section tells you how to change the current password used to enter

the CM9760-MDA Setup program.

•

The 

Set Unit ID 

section describes how to select the unit you want.

•

The 

Set System

 section deals with the setup of the communication parameters for the

CM9760-MDA Setup program and the CM9760-MDA unit and with the reset of MDA
software.

•

The 

Set Time and Date

,

 Set Unit ID

,

 Set Titles

,

 Set Cable Compensation

, 

Set Display,

and 

Set Message Text 

sections deal with the setup of the data to be used by the

CM9760-MDA and the CM9760-MDA Setup program.

•

The 

Send Data 

section describes how to send time and date, titles, or both.

To change the password used to enter the CM9760-MDA Setup program, click Edit and
then click Password on the CM9760-MDA SETUP dialog box. As shown in Figure 18, a
dialog box appears asking you to enter the old (current) password.

Enter the current password, and then click OK.

As shown in Figure 19, another dialog box appears asking you to enter a new password
and to verify the new password by entering it a second time.

Figure 18.  Old Password Dialog Box

After entering and verifying your new password, click the Change button to load your new
password. If you decide not to change your password, click the Cancel button.

Figure 19.  New Password Dialog Box