Emulex 3.4 User Manual
The HBAnyware Utility User Manual
Page 115
Diagnostics
Performing Diagnostic Tests
Use the Diagnostics tab to do the following:
•
Run these tests on Emulex HBA's installed in the system:
•
PCI Loopback (see page 119)
•
Internal Loopback (see page 119)
•
External Loopback (see page 119)
•
Power-On Self Test (POST) (see page 116)
•
Echo (End-to-End) (see page 121)
•
Quick Test (see page 116)
•
Perform a diagnostic dump (see page 117)
•
View PCI registers and wakeup parameter (see page 118)
•
Control HBA beaconing (see page 116)
Figure 53: Diagnostics tab
Note: All diagnostic tests and diagnostic dumps can only be performed on the local system
or on remote systems connected with TCP/IP access. Diagnostic tests and
diagnostic dumps cannot be performed on remote systems connected with FC
access.
diagnostic dumps cannot be performed on remote systems connected with FC
access.
Note: Diagnostics are not available on VMware ESX Server.