Emulex 3.4 User Manual

5.

Enter a new value in the Value field in decimal or hexadecimal format, depending on how the 
current value is presented. If the value is in hexadecimal format, it is prefaced by "0x" (for 
example” 0x2d”).

6.

To make a change temporary (the parameter to revert to its last permanent setting when the 
system is rebooted), check the Make changes temporary box. This option is available only for 
dynamic parameters.

7.

To make changes to multiple parameters, check the Make all changes temporary box. Only 
dynamic parameters can be made temporary.

8.

Click Apply.

To change non-dynamic parameter values:

1.

Navigate to the /usr/sbin/hbanyware directory and run the scripts to stop the HBAnyware utility 
processes. Type:

./stop_hbanyware

2.

Stop all I/O to LPFC attached devices.

3.

Unload the lpfcdfc driver. Type:

rmmod lpfcdfc

4.

Unload the LPFC driver. Type:

rmmod lpfc

5.

Reload the driver.Type:

modprobe lpfc 
modprobe lpfcdfc

The HBAnyware services will start automatically when you launch the application.

For these changes to persist after a reboot you must create a new ramdisk image.