Kawasaki 691191 User Manual
Store idle tools out of reach of children and other untrained persons.
Tools are
dangerous in the hands of untrained users.
When battery pack is not in use, keep it away from other metal objects like:
paper clips, coins, keys, nails, screws, or other small metal objects that can
make a connection from one terminal to another.
paper clips, coins, keys, nails, screws, or other small metal objects that can
make a connection from one terminal to another.
Shorting the battery terminals
together may cause sparks, burns or a fire.
Maintain tools with care. Keep cutting tools sharp and clean
. Properly maintained
tools with sharp cutting edge are less likely to bind and are easier to control.
Check for misalignment or binding of moving parts, breakage of parts, and any
other condition that may affect the tool’s operation. If damaged, have the tool
serviced before using.
other condition that may affect the tool’s operation. If damaged, have the tool
serviced before using.
Many accidents are caused by poorly maintained tools.
Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one tool may create a risk of injury when used
Accessories that may be suitable for one tool may create a risk of injury when used
on another tool.
SERVICE
Tool service must be performed only by qualified repair personnel.
Service or
maintenance by unqualified personnel may result in a risk of injury.
When servicing a tool, use only identical replacement parts. Follow instructions
in the Maintenance section of this manual.
in the Maintenance section of this manual.
Use of unauthorized parts or failure to
follow Maintenance Instructions may create a risk of shock or injury.
SAFETY RULES FOR CIRCULAR SAW
NEVER assume the blade has stopped just because
the trigger has been released.
Blades may continue moving even after the
motor stops.
Always wear safety goggles or eye protection when using this tool. Use a dust
mask or respirator for applications which generate dust.
mask or respirator for applications which generate dust.
This saw may throw up
debris that could lodge in the eyes causing severe pain or injury.
Inspect the bolts and blade washers before each use.
Damaged or incorrect bolts
or blade washers can cause injury.
When using the Circular Saw, always maintain a firm grip on the tool with both
hands. Never put your hands or feet in the cutting area. Do not grasp the tool or
place your hands too close to the blade.
hands. Never put your hands or feet in the cutting area. Do not grasp the tool or
place your hands too close to the blade.
Keep your hands well away from the
blade. Never reach underneath the tool while the blade is in motion. Do not use your
legs or feet to stabilize the work piece.
PERSONAL SAFETY
Stay alert, watch what you are doing, and use common sense when operat-
ing a power tool. Do not use tool while tired or under the influence of drugs,
alcohol or medication.
ing a power tool. Do not use tool while tired or under the influence of drugs,
alcohol or medication.
A moment of inattention while operating power tools
may result in serious personal injury.
Dress properly. Do not wear loose clothing or jewelry. Contain long hair.
Keep your hair, clothing, and gloves away from moving parts.
Keep your hair, clothing, and gloves away from moving parts.
Loose clothes,
jewelry or long hair can be caught in moving parts.
Avoid accidental starting. Be sure switch is in the locked or “OFF” position
before inserting battery pack.
before inserting battery pack.
Carrying power tools with your finger on the
switch or inserting battery pack into a tool with the power switch “ON” invites
accidents.
Remove adjusting keys or wrenches before turning the tool “ON”.
A wrench or a key that is left attached to a rotating part of the tool may result
A wrench or a key that is left attached to a rotating part of the tool may result
in personal injury.
Do not overreach. Keep proper footing and balance at all times.
Proper foot-
ing and balance enable better control of the tool in unexpected situations.
Use safety equipment. Always wear eye protection.
Dust mask, non-skid
safety shoes, hard hat, or hearing protection must be used for appropriate con-
ditions.
TOOL USE AND CARE
Use clamps or other practical ways to secure and support the workpiece to a
stable platform.
stable platform.
Holding the work by hand or against your body is unstable and
may lead to loss of control.
Do not force tool. Use the correct tool for your application.
The correct tool will
do the job better and safer at the rate for which it is designed.
Do not use the tool if the power switch does not turn it “ON” or “OFF”.
A tool that
cannot be controlled with the switch is dangerous and must be repaired.
Disconnect battery pack from tool or place the switch in the locked or “OFF” position
before making any adjustments, changing accessories, or storing the tool.
before making any adjustments, changing accessories, or storing the tool.
Such
preventative safety measures reduce the risk of starting the tool accidentally.
5