Metabo Classic 8 User Manual

ENGLISH

− Wait until the compressor has

come to a complete stop.

− Ensure the compressor and all air

tools and accessories connected
to it are relieved from pressure.

− Let the device and all air tools

and accessories used cool off.

After all servicing:

− Check to see that all safety

devices are operational.

− Make sure that no tools or other

parts remain on or in the
machine.

Compressor does not run:

• No mains voltage.

− Check cables, plug, outlet and

mains fuse.

• Mains voltage too low.

− Use only extension cables with

sufficient lead cross section (see
"Technical Specifications"). Avoid
using extension cable with cold
machine.

• Compressor was stopped by

unplugging.
− Switch compressor OFF at the

On/Off switch, then ON again.

• Motor has overheated, caused by

insufficient cooling (cooling fins cov-
ered).
− Kompressor am Ein/Aus-Schalter

ausschalten; Ursache der Über-
hitzung beseitigen; etwa zehn
Minuten abkühlen lassen; Motor-
schutzschalter drücken; Kom-
pressor am Ein/Aus-Schalter
erneut einschalten.

Compressor runs but does not build
up sufficient pressure.

• Condensate drain of pressure ves-

sel leaky.
− Check gasket of drain cock(s);

replace if necessary.

− Tighten drain cock(s) fingertight.

• Check valve leaky.

− Have check valve serviced by

qualified service centre.

Air tool is not supplied with sufficient
pressure.

• Pressure regulator not opened wide

enough.
− Open pressure regulator more.

• Hose connection between compres-

sor and air tool leaky.
− Check air hoses, replace defec-

tive parts if necessary.

Danger!

Repairs to power tools must be car-
ried out by qualified electricians only!

Electric tools in need of repair can be
send to the service centre in your coun-
try. See spare parts list for address.

Please attach a description of the fault to
the power tool.

The tool's packaging materials are
100 % recyclable.

Worn out machines and accessories
contain considerable amounts of valua-
ble raw and plastic materials, which can
be recycled.

These instructions are printed on paper
produced with elemental chlorine free
bleaching process.

Repairs

Environmental Protection