Emerson 20/20 User Manual

19 – 1

Vission 20/20 • Operation and Service Manual •Vilter/Emerson • 35391SC 1.8.5153

Section 19 • Configuration

Overview

The confi guration screen is where most of the Vission 
20/20 features are enabled and confi gured, see Figure 
19-1. Confi guration Screen - Page 1. The initial Setup of 
the Vission 20/20 will generally start here. Depending on 
what is selected, different portions of the Vission 20/20 
will be available to the operator.

Units

This section sets how values will be represented through 
out the program.
Temp Units:
•  Drop-down box to select the temperature units from 

Fahrenheit and Celsius. Once selected, all screen 
temperatures will be displayed in the chosen units.

Press Units:

•  Drop-down Box to select the pressure units. Psig, Bar, 

and Kpa are the possible selections and the units will 
be displayed for every pressure value throughout the 
screens.

Order Num:
• Identifi es the Order number of the purchase of the 

compressor. This Number will be needed If the opera-
tor requires help from Vilter.

Run Hours:
• Offers the ability to change the compressor run 

hours. This is typically used when replacing an older 
micro controller on and existing compressor with a 
new Vission 20/20.

Time & Date

This section sets the time and date of the Vission 20/20. 
Accurate time and date are accentual for accurate 

Figure 19-1. Confi guration Screen - Page 1