Grizzly G0469 User Manual

Model G0466/G0469 Air Compressors

This  machine  must  have  a  ground
prong in the plug to help ensure that it
is grounded. DO NOT remove ground
prong  from  plug  to  fit  into  a  two-
pronged  outlet!  If  the  plug  will  not
fit  the  outlet,  have  the  proper  outlet
installed by a qualified electrician.

SECTION 2: CIRCUIT

REQUIREMENTS

Figure 1. Typical type 5-15 plug and

receptacle.

Serious personal injury could occur
if  you  connect  the  machine  to  the
power source before you have com-
pleted  the  set  up  process.  DO  NOT
connect  the  machine  to  the  power
source until instructed to do so.

110V Operation

Amperage Draw

The motors on the air compressors will
draw the following amps:

G0466 Motor Draw ...................... 8 Amps
G0469 Motor Draw .....................14 Amps

Circuit Requirements

Only  connect  your  machine  to  a  cir-
cuit  that  meets  the  requirements  below.
Always  check  to  see  if  the  wires  and
circuit breaker in your circuit are capable
of handling the amperage draw from your
machine,  as  well  as  any  other  machines
that  could  be  operating  on  the  same  cir-
cuit. If you are unsure, consult a qualified
electrician.

Model G0466
Minimum Circuit Requirement ..... 15 Amp

Model G0469
Minimum Circuit Requirement ..... 20 Amp

Plug/Receptacle Type

Plug Type ..............NEMA 5-15 (

Figure 1)