Graco 2.40E+14 User Manual
Installation
3A0293C
3
Adding a Lubricator (Accessory)
To add an accessory air line lubricator to the kit, you
must order Part No. 244841 Lubricator Accessory Kit.
must order Part No. 244841 Lubricator Accessory Kit.
1.
Remove filter/regulator from mount bracket.
2.
Remove the pin (B) from the outlet of the filter/regu-
lator. F
lator. F
. 2.
3.
Remove regulator cover.
4.
Slide the threaded end insert off (13)with outlet fit-
tings still attached.
tings still attached.
5.
Install the modular connector (2a) (with o-rings and
grease provided) between the filter/regulator and
the lubricator (L).
grease provided) between the filter/regulator and
the lubricator (L).
6.
Install the threaded end insert (13) onto the outlet of
the lubricator (L) with o-ring and grease.
the lubricator (L) with o-ring and grease.
7.
Install the three retaining pins (B).
NOTE: On light weight cart units only, replace the
3/4” npt pipe extension and the 3/4” npt f x f elbow
with the 3/4” npt f x m elbow supplied with kit
244841, refer to instructions (form 406512) included
with kit.
3/4” npt pipe extension and the 3/4” npt f x f elbow
with the 3/4” npt f x m elbow supplied with kit
244841, refer to instructions (form 406512) included
with kit.
The lubricator meters oil into the moving air stream to
automatically lubricate air-operated motors. A manual
adjustment in the housing (F), Fig. 2, sets the oil drip
rate into the air stream, which can be monitored through
a sight glass. One to two drops of oil per minute is com-
mon. Use an oil rated at 50 to 200 SUS (ISO grade 7 to
46) at 100°F (38°C), such as Graco motor oil, Part No.
202659.
automatically lubricate air-operated motors. A manual
adjustment in the housing (F), Fig. 2, sets the oil drip
rate into the air stream, which can be monitored through
a sight glass. One to two drops of oil per minute is com-
mon. Use an oil rated at 50 to 200 SUS (ISO grade 7 to
46) at 100°F (38°C), such as Graco motor oil, Part No.
202659.
Refill Lubricator
1.
Unscrew the fill plug (L, F
. 2) and pour in the oil.
The lubricator’s capacity is 7 oz. (0.2 liter).
2.
Check the oil level with the side sight glass. The
lubricator can be refilled with the system pressur-
ized. However, always relieve the system pres-
sure before removing the bowl for any reason.
lubricator can be refilled with the system pressur-
ized. However, always relieve the system pres-
sure before removing the bowl for any reason.
F
IG
. 2
B
B
2a
1
4
13
r_24e025_3A0293_4a