Grizzly G0719 User Manual
-20-
model g0719 (mfg. since 10/10)
figure 18. Angle sanding.
figure 19. sanding with table tilted.
figure 17. example of X-axis sanding.
note: To perform sanding on compound-angle
cuts, tilt the table and rotate the miter gauge to the
appropriate angles.
cuts, tilt the table and rotate the miter gauge to the
appropriate angles.
note: To prevent burning the workpiece and over-
loading the sanding disc, move the workpiece
slowly back and forth from the left side of the
sanding disc to the center.
loading the sanding disc, move the workpiece
slowly back and forth from the left side of the
sanding disc to the center.