Tektronix TDS460A User Manual

Command Descriptions

TDS Family Oscilloscope Programmer Manual

:

DIAg

:

?

LOG

RESUlt

<QString> in the following format:

<Status>,<Modulename>[,<Status>,<Modulename>...]

DIAG:RESULT:LOG?
might return 

:DIAG:RESULT:LOG "pass--Processor,pass--Display,

pass--FP/Proc Interface,FAIL--Front Panel"

Selects the acquisition system test sequence that will be run when the
DIAg:STATE EXECUte command is sent. This command is equivalent to setting
Area in the Utility menu when System is set to Diag/Err.

Calibration and Diagnostic

DIAg:SELect:ACQUISition ALL

:

SELect

DIAg

:

ACQUISition

<Space>

ALL

ALL selects functional, memory, and register tests.

Specifies that all system test sequences will be run when the DIAg:STATE
EXECUte command is sent. This command is equivalent to setting Area in the
Utility menu when System is set to Diag/Err.

Calibration and Diagnostic

DIAg:SELect:ALL ALL

:

SELect

DIAg

:

<Space>

ALL

ALL

ALL selects functional, memory, and register tests for the acquisition, processor
and display systems, and self diagnostics for the front panel.