Tektronix TDS460A User Manual

Command Descriptions

2–74

TDS Family Oscilloscope Programmer Manual

Table 2–28: Offset Ranges for the TDS 400A, 510A, 540C, 600B, 754C, & 784C (All
Channels) and the TDS 520C & 724C (Channel 1 & Channel 2) using a 1x
Probe

CH<x>:SCAle

OFFSet Range

1 mV/div – 99.5 mV/div

1 V

100 mV/div – 995 mV/div

10 V

1 V/div – 10 V/div

100 V

Table 2–29: Offset Ranges for the TDS 520C & 724C (Aux 1 & Aux 2) using a 1x
Probe

CH<x>:SCAle

OFFSet Range

50 mV/div & 100 mV/div

.5 V

500 mV/div & 1 V/div

5.0 V

5 V/div & 10 V/div

50 V

CH1:OFFSET 0.5E+00
lowers the channel 1 displayed waveform by 0.5 volts.

CH1:OFFSET?
might return

500.0E-3, indicating that the current channel 1 offset is 0.5 volts.

CH<x>:POSition

Sets or queries the vertical position of the specified channel. The position value
is applied to the signal before digitization. This is equivalent to setting Position
in the Vertical menu or adjusting the front-panel Vertical Position knob.

Vertical

CH<x>:OFFSet

CH<x>:POSition <NR3>

CH<x>:POSition?

Examples

Group

Related Commands

Syntax