Tektronix TDS420A User Manual
Command Descriptions
2–132
TDS Family Oscilloscope Programmer Manual
LONG displays, as the indicator, a horizontal line in the center of the graticule for
each displayed trigger signal.
each displayed trigger signal.
DISPLAY:TRIGBAR LONG
sets the display to show a long trigger indicator bar (or bars).
sets the display to show a long trigger indicator bar (or bars).
DISplay:TRIGT
Controls the display of the trigger point indicator. This is equivalent to setting
the Display ‘T’ @ Trigger Point in the Readout Options side menu. The query
form returns an ON (1) or an OFF (0).
the Display ‘T’ @ Trigger Point in the Readout Options side menu. The query
form returns an ON (1) or an OFF (0).
Display
DISplay:TRIGT { ON | OFF | <NR1> }
DISplay:TRIGT?
OFF
DISplay
:
TRIGT
<Space>
?
<NR1>
ON
<OFF> or <NR1> = 0 removes the trigger indicator from the display.
<ON> or <NR1> 0 displays a trigger indicator on each of the displayed
waveforms. The trigger indicator is in reverse video for the selected waveform.
waveforms. The trigger indicator is in reverse video for the selected waveform.
DISPLAY:TRIGT ON
sets the display to show trigger indicators.
sets the display to show trigger indicators.
DISPLAY:TRIGT?
might return
might return
1 indicating that the display shows trigger indicators.
*ESE
Sets and queries the bits in the Event Status Enable Register (ESER). The ESER
prevents events from being reported to the Status Byte Register (STB). For a
more detailed discussion of the use of these registers, see page 3–1.
prevents events from being reported to the Status Byte Register (STB). For a
more detailed discussion of the use of these registers, see page 3–1.
Examples
Group
Syntax
Arguments
Examples